1、 In terms of power supply, as the common voltage of bridge broken aluminum doors and windows processing equipment is 380V, we must pay attention to the connection of live wire and zero wire when wiring. Generally speaking, door and window equipment manufacturers will give a color, the live line is black or blue, the zero line is red (each factory depends on the situation). If the live wire is connected upside down, just switch two wires at both ends of the live wire.
2、 In terms of gas source, as the pressing material of the door and window processing equipment is compressed by the air cylinder, ensuring sufficient gas source is the premise of equipment use. If the air pressure is not reached, the saw blade of the double head cutting saw for the broken bridge aluminum profile will be affected, and the processing effect will be affected accordingly. Generally speaking, a set of door and window processing equipment should ensure that the air pressure can reach 8 pressures and the air supply flow can reach 0.3. If there are too many equipment, it is not enough to rely on air pumps alone. One or two air tanks need to be prepared.
